Looking for ways to create an exceptional, unique facade?
The search for the icing on the cake is now over. Our laser technology enables us to leave nothing to be desired. From now on you can let off steam on your facade as you wish and play with shapes and patterns according to your own ideas.
Our CELLON® panel is a high-pressure laminate panel (HPL Compact or solid core panel) consisting of 70% cellulose webs and 30% phenolic resin. The extremely weather and frost-resistant material is ideal for outdoor applications.
The HPL panel convinces with absolute moisture resistance and minimal expansion. In contrast to conventional HPL panels, CELLON® is characterized not only by the variety of shapes and colors available, but above all by its natural appearance. The colour is applied directly to the resin and thus the top layer, which means that the sterile resin surface does not stand out, but rather the selected color concept is ideally emphasized.
The raw panels are project-specifically cut to the desired dimensions using laser technology (including drill holes). You choose the width (x) and the length (y) of the panels individually. Do you want round cuts or additional cut-outs? Simply draw them in your DXF plan and they will be manufactured to size.Please consider the following raw panel formats for waste optimisation:
raw width
raw length
1280 mm1500 mm1800 mm
2400 mm3000 mm*3600 mm3600 mm
*Only this format is also available with a decor surface in stone or wood look.
Due to the open areas of a perforated facade made of CELLON® , the layer behind it may have to meet higher requirements such as wind and weather protection. Should the normal stress be exceeded, the following common facade systems can be used:
The design of the perforated façade can run through the entire façade surface and does not necessarily have to be interrupted in the construction areas. Depending on the design, it may be that the substructure becomes visible through the openings, which can disturb the perception of the image. To avoid this, either the panel can be highlighted by a strong contrast to the substructure and the wall or only a punctual attachment can be used.
The perforated facade is the design highlight of your building. For this reason, we already provide support in the design phase with our many years of experience and in the preparation of the tender texts. The division and dimensioning of the substructure is carried out by the qualified facade construction company in cooperation with the civil engineer. He also does the dimensional checks on site and the installation. We deliver the panels ready for installation to the craftsman's company but do not install them by ourselfs.
Buildings as unique as their inhabitants. A building as individual as its owner? Delicately-perforated facade elements quickly make a building eye-catching. The balustrades made by Bruag from solid core panels using flexible laser-cutting technology and employing an enormous range of colours will enable you to give your building an individual feel too – without going to any great lengths.
Humans are unique. Two men looking exactly the same? Not possible. Unfortunately that is not true for buildings. All too often, newly built structures offer little differentiation. With a perforated façade by Bruag, this won’t occur to your building. Besides a broad variety of standard perforations, our production allows us to produce a perforated panel exactly according to your imaginings. It is possible to include your sign, your lettering or even to include your very own ornament or mashrabyia.
Let yourself be inspired by projects that have already been implemented or go on to the technical information sheet for perforated facades, the brochure for all outdoor applications or our perforation collection with design templates. In addition to the almost unlimited variety of shapes, there is also a very large selection of color options.